Okay, and here is a photo of what the pocket looks like when the dress is inside out. My index finger shows you where the hole that the pump cord goes through is located.
Permalink Reply by Marie B on January 22, 2013 at 1:35pm yes I've done this myself. also if you are a sewer, you can add a pocket to a side seam pretty easily, or even ask an alterations place to do it for you.
Permalink Reply by Spock on January 22, 2013 at 3:34pm My big problem is that more and clothes do not have pockets at all. If I am buying dress pants, my selection is greatly reduced by the request that the pants have to have pockets. I haven't seen a pocket in a skirt in awhile. Dresses, yes, but I think the idea is that you will wear a jacket or sweater with a skirt and it will have pockets.

Permalink Reply by Stemwinder on January 22, 2013 at 3:41pm My wife did this to one of my work shirt pockets. It was a little more involved since it require a slit to be cut and then a large button hole sewn in. I find that my work shirt pocket is an excellent place for my pump, it has a flap to keep it in place and it's up away from the abuse it would get when clipped to my belt.
I haven't ask her to do the rest because I have been just stringing the tube out of the pocket and into my shirt above a button. There is only about 1 inch of tube showing that is hardly noticeable and besides I'm not trying to hide it anyway. This way I can remove my shirt without disconnecting.
@Spock: That's funny, most of my skirts actually have pockets and none of my sweaters do (and it's usually too warm where I live to wear jackets regularly). I guess it just depends where you shop, but having a top with a pocket for the pump is a good idea.
There are some stores on etsy where you can buy garters for pumps, but they never want to stay up.
Another thing I have done with dresses with no pockets (and too form fitting to add pockets to) is find a matching small purse and put the pump in there. If I were more clever at sewing I might even find a way to sew it to the dress so that it doesn't swing about or look awkward.
Maybe there is a way to have a pin that one could place on an appropriate part of the dress that is sturdy enough?
Permalink Reply by KML on January 22, 2013 at 4:31pm I am struggling with a bridesmaid dress I am going to need to wear come June. It is form fitting and the pump just bulges out...Not quite sure what to do.
Permalink Reply by Mishi on January 22, 2013 at 10:28pm When i was married over two decades ago lol,I put my pump in my left suspender.
Permalink Reply by artwoman on January 24, 2013 at 10:39am I've taken a bandeau bra, that is too small to wear as a bra. I wear it around my waist and tuck the pump in there. I have worn strapless knit dresses that are fairly form fitting and it works well. UIt does mean going to a restroom to bolus, but a little inconvenience is okay.

Permalink Reply by jrtpup on January 23, 2013 at 4:41am Baby socks! Pumps fit perfectly in a baby sock, and they can be discreetly safety-pinned to the inside seam/waistband of almost anything. I've also used Vetrap (stretchy, self-adhesive wrap) to attach my pump to my lower leg. The only issue with it is that you really can't access the pump, so if you don't have a remote it probably wouldn't work.
Manny Hernandez(Co-Founder, Editor, has LADA)
|
Bradford (has type 1) |
Lorraine (mother of type 1) |
Marie B (has type 1) |
|
|
|
|
|
|
This site complies with the HONcode standard for trustworthy health information: verify here.
© 2013 A community of people touched by diabetes, run by the Diabetes Hands Foundation.
