I have had a minimed Veo for about 3 wqeeks now, I was wondering if anyone has expierence with their pump/infusion set with a hot tub? Does it remain attached to you? Is the glue still glue? I'm usually in the hot tub for 20 minutes. Any tips Thanks
Tags:
Permalink Reply by Marie B on January 30, 2012 at 7:01am hi Rayzer. it's been years since I was in a hot tub, but I used to just disconnect my infusion set (after testing and possibly giving myself a correction) and I had no problems. here's a discussion where a couple of products are mentioned if you have adhesive issues.
http://www.tudiabetes.org/forum/topics/hot-tubs-and-pump-sites
Thanks for the reply Marie B, my CDE said go ahead with the hot tub, my Minimed rep said no with out changing infusion set. Thanks for the link, I am new here, only joined last week
The worst place for diabetics is a hot tub.
Permalink Reply by Jennifer on January 30, 2012 at 11:19am I have never had a problem in a hot tub. I just disconnect and reattach when I get out. You may have to do a fixed prime to refill the cannula as the heat might destroy what is in there already. I also have had luck with my CGM sensor - never have fried it in a hot tub - of course I haven't been a very hot tub (> 104 degrees F).
Manny Hernandez(Co-Founder, Editor, has LADA)
|
Bradford (has type 1) |
Lorraine (mother of type 1) |
Marie B (has type 1) |
|
|
|
|
|
|
This site complies with the HONcode standard for trustworthy health information: verify here.
© 2013 A community of people touched by diabetes, run by the Diabetes Hands Foundation.
