8mm sure t trail again. still hurts!! i dont mind the pain, i can deal with it if its getting the job done but numbers seem to be running higher. is pain normal? i worry the 6mm wont be as reliable.
Tags:

Permalink Reply by Stemwinder on January 12, 2013 at 2:23pm Hi Andrea, I'm a new pumper and would like to know why you think the 6mm will be less reliable. I may be talking stupid (tend to do that sometimes) but it seems to me that if your having pain you may be hitting muscle and in that case wouldnt the 6mm be better.
Gary
Permalink Reply by andrea on January 13, 2013 at 5:47pm 
Permalink Reply by Stemwinder on January 13, 2013 at 6:08pm I have no experience with the Sure T so I might be talking trash but if the tip of the 8mm is in muscle I would think that might affect absorption due to inflammation.
Permalink Reply by andrea on January 13, 2013 at 10:29am
Permalink Reply by christy on January 13, 2013 at 12:45pm Are you experiencing colder temps? I really have to crank my basal up in the winter for the colder weather. Currently I have a temp basal rate of 140%.

Permalink Reply by Stemwinder on January 13, 2013 at 4:43pm I haven't been away from mdi long enough to miss it but I have been having issues with bent cannulas on the 9mm Quick sets. I tried out a Silhoutte last time and had no problems with it. I changed to a 6mm Quickset this morning and so far it is working fine. I suspect that I have been hitting muscle with the 9mm one.
I have wondered what are the advantages of the longer cannulas.
Permalink Reply by andrea on January 13, 2013 at 12:54pm
Permalink Reply by christy on January 13, 2013 at 5:34pm My spring and summer basal's can drop as low as .800 but usually not lower than .700, but my winter ones can go up considerably. This is my second winter with my pump and I had been doing pretty good until this last couple of weeks not needing to increase them. Currently I'm running as high as 1.15 an hour. It may be the cannula's as well too. I don't really have any scientific method of adjusting my basals, but I just kinda start inching it up, till I find something that works. Of course you are talking to someone whose been diabetic, almost 28 years, I kinda fly by the seat of my pants. If you are newly diagnosed you might not be quite at the comfort level yet.
Permalink Reply by andrea on January 13, 2013 at 6:56pm 
Permalink Reply by Stemwinder on January 13, 2013 at 7:50pm I don't know Andrea. I think most decide through trial and error. Maybe some of the more experienced pumpers could give some insight.
Permalink Reply by acidrock23 on January 13, 2013 at 8:19pm I've used the 13mm Silhouettes for a while, I think I opted for a longer one as I'm not really bothered by needles but like to feel as if the thing is stuck in all the way so it will work better. I was bigger when I started using them but, since they go in at an angle, it's pretty easy to make sure they don't hit anything. The CGM needles are a bit dicier, I suspect they hit all sorts of stuff.
Manny Hernandez(Co-Founder, Editor, has LADA)
|
Bradford (has type 1) |
Lorraine (mother of type 1) |
Marie B (has type 1) |
|
|
|
|
|
|
This site complies with the HONcode standard for trustworthy health information: verify here.
© 2013 A community of people touched by diabetes, run by the Diabetes Hands Foundation.
