Permalink Reply by Ahmad on July 22, 2012 at 6:13pm I have been using the IV3000, never tried the Opsite flexiflix! the IV3000 do the job for me!
Permalink Reply by ATRannals on July 22, 2012 at 6:36pm I've used Opsite Flexifix and Tegaderm. I really like the pre-cut sizes of Tegaderm and the way they have a perimeter piece for putting the tape on makes it easy. That said, I did buy a large roll of Flexifix and have been manually cutting the pieces to size and cutting out a sensor sized hole in the middle.
With Skin-Tac, I so far have been successful in keeping the Flexifix in place for at least a week at a time. I just pulled my latest piece of Flexifix off without removing the sensor and replaced it with a new piece. Sensor is still going strong on day 10.
Anyone care to chime in with what the actual differences may be between the Opsite Flexifix, Tegaderm and the IV3000 besides personal experiences?
Alan
Permalink Reply by MelanieRae on July 22, 2012 at 7:26pm I use the IV3000 with both my dex and my pump. I find they stick very well, and if I do have to replace it, it tends not to stick too strongly to the actual site (insulin cannula or sensor) and can easily be replaced!

Permalink Reply by jrtpup on July 22, 2012 at 8:07pm Opsite Flexifix works best for me,lasts longest.
+1

Permalink Reply by Lorraine on July 23, 2012 at 6:23am Interesting. I haven't noticed a difference, but that's because I'm not paying attention! This is good to know!
Haven't tried the IV3000 but loce the Opsite. Forgot to put some on last sensor and when the sensor adhesive wore off the sensor just went...pomph..and fell off. Prob could have gotten ano week if I'd put on the Opsite. Getting better at putting on the sensors so wasn't too bad. Used to just have a fit with them. Even had to call Dex in the beginning to help get them on me.
Have a great day everyone.
Permalink Reply by Brian Whitlock on July 23, 2012 at 8:25am I like the flexifix roll, lets me use it for my sensor(18+ days) and can cut to size easily.
If I really feel the need I can use the roll to get a bigger piece to cover my pump(omnipod).
Price may be an issue also, but, you would have to check with your supplier and figure out the difference.
Permalink Reply by Lilliana's BumPancreas on July 23, 2012 at 8:29am Flexifix works best for me! :-)
Permalink Reply by cyborg mom on August 7, 2012 at 9:08am
Permalink Reply by type3mom on August 7, 2012 at 8:21pm We use 4" wide Flexifix, round the corners, and cut an oval in the middle for the sensor. We also use a bit of Skin-Tac before putting that on. Usually lasts 2 weeks.
+1...Exactly!
Manny Hernandez(Co-Founder, Editor, has LADA)
|
Bradford (has type 1) |
Lorraine (mother of type 1) |
Marie B (has type 1) |
|
|
|
|
|
|
This site complies with the HONcode standard for trustworthy health information: verify here.
© 2013 A community of people touched by diabetes, run by the Diabetes Hands Foundation.
