CareLink for Windows 7
For those that the CareLink USB doesn't work for Windows 7, had called MiniMed and got instructions if you had placed the CareLink USB in before your suppose to...
I had to ask for help in and try to figure out why I couldn't install the CareLink USB... Had to swallow my pride of being a computer programmer cause I couldn't figure this one out....
I thought I would give instructions on when you are axious to upload your data instead of following instructions. Yes, I'm one of those geeks that throw the manual away and do it myself cause the manual is wrong.
Here is the instructions I followed by the nice tech....
CareLink USB for Windows 7
1. Do not connect CareLink USB to computer
2. Navigate to C:\ProgramData
a. Delete “Medtronic” folder
3. Empty Recycling Bin on Desktop
4. Clear out all Internet Explorer windows
5. Go to Start --> All Programs Find Internet Explorer (DO NOT CLICK ON IT) Right click on IE and you’ll see “Run as Administrator”
a. Internet Explorer will open up navigate to CareLink Website https://carelink.minimed.com
b. Log into your account
6. Go to “UP Load” follow instructions on the screen. System will install the new driver and will recreate a new folder in C:\ProgramData.
7. Important: Only insert CareLink USB into the USB port on computer when it asks for it.
8. Make sure all alarms, warnings, have enough battery power at least two bars on the pump before transmitting data.
9. Just follow through the screens when needing to prepare for first upload.
10. Oh make sure you have java install….
I had to ask for help in and try to figure out why I couldn't install the CareLink USB... Had to swallow my pride of being a computer programmer cause I couldn't figure this one out....
I thought I would give instructions on when you are axious to upload your data instead of following instructions. Yes, I'm one of those geeks that throw the manual away and do it myself cause the manual is wrong.
Here is the instructions I followed by the nice tech....
CareLink USB for Windows 7
1. Do not connect CareLink USB to computer
2. Navigate to C:\ProgramData
a. Delete “Medtronic” folder
3. Empty Recycling Bin on Desktop
4. Clear out all Internet Explorer windows
5. Go to Start --> All Programs Find Internet Explorer (DO NOT CLICK ON IT) Right click on IE and you’ll see “Run as Administrator”
a. Internet Explorer will open up navigate to CareLink Website https://carelink.minimed.com
b. Log into your account
6. Go to “UP Load” follow instructions on the screen. System will install the new driver and will recreate a new folder in C:\ProgramData.
7. Important: Only insert CareLink USB into the USB port on computer when it asks for it.
8. Make sure all alarms, warnings, have enough battery power at least two bars on the pump before transmitting data.
9. Just follow through the screens when needing to prepare for first upload.
10. Oh make sure you have java install….
Tags: CareLink
Replies to This Discussion
-
Permalink Reply by AJ on -
Thanks for writing this down for all ... For me it has been hit or miss.
I usually run into problems with the Internet Explorer option.
I get around this by running a Virtual PC, with XP, and don't update IE.
Hopefully one or the other will work for everyone.
It would be great if MM would not have the requirements for IE or for resolution - some of us have bad eyes! -
-
Permalink Reply by AJ on
-
I wasn't aware of that - I thought they still had the strict requirements.
Maybe it will even work with FireFox..
Also: Putting in any new USB device before the system requests it is asking for trouble.
Its supposed to be -
I am working on trying to decode the msgs the usb stick sends to the pump....
maybe I can bring back the old setup on PC program - which was a major selling point for me -
-
Permalink Reply by Duarte on -
If you have java instaled that probably work fine i only have tried opera and chrome
-
-
Permalink Reply by Margaret on -
I couldn't wait to get started!! 1. Couldn't find any old Program Medtonic files to delete, 2. Followed the steps anyway. 3. Plugged in CareLink AFTER it told me to do so. 4. Got same message as before: Couldn't install driver. I tried it many times. I have Foxfire so that may make a difference; however, I can't get OUT of FF to get back into IE. Oh, I do have Java's latest version!
Back to pencil and paper! -
-
Permalink Reply by Duarte on
-
I have just tried FF and worked to .So i recommend you to follow this link above (copy and paste)
https://carelink.minimed.com/patient/entry.jsp?bhcp=1
click continue in end of page
and then you just insert you´´re user name and password -
-
Permalink Reply by Duarte on
-
here you have 2 sreen capture of carelink site one with chome and other with FF that ilustrate what i have said before if what you get is the same you just have click continue
- Attachments:
-
-
carelinkcapture.png, 271 KB -
carelinkFF.png, 228 KB
-
-
Advertisement
REsources
Groups
From the Diabetes Hands Foundation blog...
Congratulations Diabetes Advocates Scholarship Recipients!
The Diabetes Hands Foundation and Diabetes Advocates Program is proud to announce and congratulate the members of DA who were granted scholarships to attend diabetes conferences in 2013! Thanks to a generous grant from Novo Nordisk, in 2013 we were …Continue Reading
La Familia de EsTuDiabetes Sigue Creciendo
El Centro Nacional de Prevención de Enfermedades Crónicas y Promoción de la Salud en el Estados Unidos encontró que a partir de 2002-2009, el 11,8% de los hispanos mayores de 20 años, que viven en los EU, viven con diabetes …Continue Reading
TuDiabetes Team
DHF STAFF
 Manny Hernandez(Co-Founder, Editor, has LADA)
|
DHF VOLUNTEERS
Lead Administrator
 Bradford (has type 1) |
Administrators
 Lorraine (mother of type 1) |
 Marie B (has type 1) |
|
|
|
|
|
|
LIKE us on Facebook
Spread the word
This site complies with the HONcode standard for trustworthy health information: verify here.
© 2013 A community of people touched by diabetes, run by the Diabetes Hands Foundation.
